[zhopkins]

If you want to see live pump pressure plotting before starting a sample run that can be done in the Direct Control software. You will need to click on the settings cog along the top bar. This will open a window and you can scroll down to the eluting pump or loading pump. Click on eluting pump pressure, then click the commands tab. Turn on AqcOn. This will start plotting a live stream of the pump pressure. You will need to make sure to turn this off prior to running your sample list. Otherwise, the system will not run the sample list. Hopefully this helps!

Attachments:

You must be logged in to view attached files.

[Author]

Posts