Live pressure readings on Thermo LC

Forums NTA Forum Software Live pressure readings on Thermo LC

Viewing 3 posts - 1 through 3 (of 3 total)
  • Author
    Posts
  • #2531
    gpblack
    Moderator

    Is there a way to see live pressure readbacks from a Thermo LC? I have a Vanquish HP and can see the pressure readings when I’m acquiring data in the Direct Control window of Tracefinder, but I’d like to see the curve before acquiring. Can I do this somehow?

    #2536
    SLN-chem
    Participant

    No, as far as I am aware but I would also like to be able to do this!

    #2556
    zhopkins
    Participant

    If you want to see live pump pressure plotting before starting a sample run that can be done in the Direct Control software. You will need to click on the settings cog along the top bar. This will open a window and you can scroll down to the eluting pump or loading pump. Click on eluting pump pressure, then click the commands tab. Turn on AqcOn. This will start plotting a live stream of the pump pressure. You will need to make sure to turn this off prior to running your sample list. Otherwise, the system will not run the sample list. Hopefully this helps!

    Attachments:
    You must be logged in to view attached files.
Viewing 3 posts - 1 through 3 (of 3 total)
  • You must be logged in to reply to this topic.